PRODUCTS - TECH SHEETS - MATERIAL SAFETY DATA SHEETS (MSDS)
PRODUCTS
All MSDS and Tech Sheets are in pdf format please
get Adobe Reader here 
WARNING
WELDING FUMES AND GASES CAN BE DANGEROUS TO YOUR HEALTH.
BEFORE USING THIS PRODUCT THE WELDER (END-USER) MUST READ AND UNDERSTAND THE COMPLETE PRODUCT WARNING LABEL AND MATERIAL SAFETY DATA SHEET (MSDS).
THE MATERIAL SAFETY DATA SHEET (MSDS) WHICH OUTLINES THE POTENTIAL HEALTH HAZARDS AND SAFETY INFORMATION RELATED TO THIS PRODUCT IS ATTACHED TO THIS WARNING. IT IS ALSO AVAILABLE FROM YOUR EMPLOYER AND WELDING SUPPLY DISTRIBUTOR.
IF YOU ARE UNABLE TO RETRIEVE THE DESIRED INFORMATION FROM THIS WEBSITE PLEASE CALL (800) 521-7878 FOR ANY DOCUMENT THAT YOU NEED.
DO NOT PROCEED WITH USE OF THIS PRODUCT UNTIL YOU READ AND UNDERSTAND THE MATERIAL SAFETY DATA SHEET (MSDS) AND PRODUCT WARNING STATEMENT.
BE SURE TO CONSULT THE LATEST VERSION OF THE MSDS.
SEE THE PRODUCT WARNING LABEL AND MSDS FOR COMPLETE WARNING INFORMATION.
Alloys for Aluminum
| Product | Description | Tech Sheet | MSDS |
| Royal 90 | Bead Forming Aluminum Brazing Alloy |
 |
|
| Royal 100 | Thin Flowing Aluminum Brazing Alloy |
|
|
| Royal 100 FCo | Flux Cored Thin Flowing Aluminum Alloy |
|
|
| Royal 110 | Flux Cored Aluminum Alloy for Brazing |
|
|
| Royal 133 | Superior Low Melting Aluminum Solder |
|
 |
| Royal 300 | Extruded Coated Aluminum Electrode (DC Reverse) |
|
|
| Royal Kirkrod | Solder for Aluminum & Zinc Die Cast |
|
|
| ER&R 4043 | Most popular Aluminum Alloy for TIG & MIG |
|
 |
| ER&R 5356 | Second most popular Aluminum Alloy for TIG & MIG |
|
|
| ER&R 1100 | Used to join high purity Aluminums |
|
|
| R A356.0 | For joining & repairing 356.0 and A356.0 castings |
|
|
| R 4047(718) | High silicon content insures good flow at lower temperature |
|
|
| ER&R 2319 | Best for welding grades 2014, 2036 and 2219 Aluminum |
|
|
| R 4145 | Can be used for Aluminum welding as well as brazing |
|
|
Alloys for Cast Iron
|
Product |
Description | Tech Sheet | MSDS |
| Royal 108 | Premium Cast Iron Solder |
|
 |
| Royal 11-10 | Bare Nickel for TIG wire (ER Ni-1) |
|
|
| Royal 11-30 | Bare Nickel for MIG wire (ER Ni-1) |
|
|
| Royal 44-30 | Premium Nickel-Iron-Manganese Mig Wire (ER NiFeMn-CI) |
|
|
| Royal 55/45-10 | 36" Bare Copper Nickel for TIG |
|
 |
| Royal 260 | Premium Nickel Alloy Electrode for Cast Iron (AC-DC) |
|
 |
| Royal 270 | Non-Machinable Cast Iron Electrode |
|
|
| Royal 290 | Premium High Nickel Alloy for Cast Iron |
|
|
| Crown 6 | Cast Iron Welding Rod for Torch |
|
 |
| Crown 255 | Nickel Alloy Electrode for Cast Iron (E NiFe-CI) |
|
 |
| Crown 295 | High Nickel Alloy Electrode for Cast Iron (E Ni-CI) |
|
|
Copper Base Alloys
|
Product |
Description | Tech Sheet | MSDS |
| Royal 3100 | Phosphor Bronze Electrode (AC-DC) |
|
|
| ALB-10-1 | 36" Aluminum Bronze for TIG (ER CuAl-A1) |
|
|
| ALB-10-2 | 36" Aluminum Bronze for TIG (ER CuAl-A2) |
|
|
| ALB-20 | Aluminum Bronze Electrode (E CuAl-A2) |
|
|
| ALB-30 | Crown Aluminum Bronze for MIG (ER CuAl-A2) |
|
|
| Silicon Bronze | 36" Cut Length for TIG and 25# spool for MIG (ER CuSi-A) |
|
|
| Deoxidized Copper | 36" Cut Length for TIG and 25# spool for MIG (ER Cu) |
|
|
| Royal 120 FC | High Strength Nickel Silver Brazing Alloy/Flux Coated (RB CuZn-D) |
|
 |
| Royal 120 | High Strength Nickel Silver Brazing Alloy/Bare (RB CuZn-D) |
|
|
| Crown 125 FC | General Purpose Low Fuming Bronze/Flux Coated (RB CuZn-C) |
|
|
| Crown 125 | General Purpose Low Fuming Bronze/Bare (RB CuZn-C) |
|
|
| Crown 126 | Low-Fuming Brass-Nickel Brazing Alloy/Bare (RB CuZn-B) |
|
|
| Royal 130 FC-P | Premium Flux Coated Brazing Rod |
|
|
Fluxes
|
Product |
Description | Tech Sheet | MSDS |
| #2 Flux | Extra Low Acid Soldering Flux |
|
|
| #45 White Flux | Silver Brazing Paste Flux |
|
 |
| #45 Black Flux | Higher Temperature Silver Brazing Flux |
|
|
| #95 Flux | Soft Solder Flux, Acid Type Liquid Soldering Flux |
|
|
| #100 Flux | Aluminum Brazing Flux |
|
|
| #125 Flux | General Purpose Brazing Flux |
|
|
| #133 Flux | Aluminum Soldering Flux |
|
|
| Royal Tiger Flux #3 | Superior General Purpose Brazing Flux |
|
|
| Royal Tiger Flux #4 | Best Flux available for brazing cast iron |
|
|
Hard Facing and Surfacing Alloys
|
Product |
Description | Tech Sheet | MSDS |
| Royal 116-E | Cobalt-Base Electrode (E CoCr-A) |
|
|
| Royal 116-T | Cobalt-Based Alloy for Torch or TIG (ER CoCr-A) |
|
|
| Royal 117-T | 30 - 40 Mesh Tungsten Carbide for Torch or TIG |
|
|
| Royal 118-T | 8 - 10 Mesh Tungsten Carbide for Torch or TIG |
|
|
| Royal 119-T | Nickel Base Hard Overlay for Torch or TIG |
|
|
| Royal 13-25FC | Nickel Manganese Flux Cored Wire |
|
|
| Royal 13-29FC | Premium Hardfacing Flux Cored Wire |
|
|
| Royal 235 | Nickel Manganese Buildup Rod (AC-DC) |
|
|
| Royal 240 | Chromium Carbide Hard Facing Electrode |
|
|
Metal Working Electrodes
|
Product |
Description | Tech Sheet | MSDS |
| Cut 202 | Cutting Electrode for All Metals |
|
|
| CHAMFER 204 | For Gouging and Chamfering All Metals |
|
|
Alloys for Nickel
|
Product |
Description | Tech Sheet | MSDS |
| Royal 11-10 | Bare Nickel TIG (ER Ni-1) |
|
 |
| Royal 11-30 | Bare Nickel MIG (ER Ni-1) |
|
|
| Royal 182 | Premium Nickel Chromium-Iron Electrode (E NiCrFe-3) |
|
 |
| Royal 82-10 | 36" Nickel-Chromium-Iron TIG Wire (ER NiCr-3) |
|
 |
| Royal 82-30 | Nickel-Chromium-Iron MIG Wire (ER NiCr-3) |
|
|
| Royal 625-10 | Nickel Chromium Molybdenum TIG Wire (ER NiCrMo-3) |
|
|
| Royal 625-30 | Nickel Chromium Molybdenum MIG Wire (ER NiCrMo-3) |
|
|
| Royal C276-20 | Premium-Chromium-Molybdenum Electrode (E NiCrMo-4) |
|
|
| Royal C276-10 | 36" Nickel-Chromium-Molybdenum TIG Wire (ER NiCrMo-4) |
|
|
| Royal C276-30 | Nickel-Chromium-Molybdenum MIG Wire (ER NiCrMo-4) |
|
|
| Royal 55/45-10 | 36" Bare Copper-Nickel for TIG (ER CuNi) |
|
|
| Royal 60-10 | Nickel-Copper TIG Wire (ER NiCu-7) |
|
|
Silver Brazing & Soldering Alloys
|
Product |
Description | Tech Sheet | MSDS |
| Royal 1000 | Non-toxic General Purpose Solder |
|
 |
| Crown 95 | Low Temperature Silver-Tin Solder |
|
|
| Sil-Cop 0 | Crown Sil-Cop alloys are self fluxing on copper to copper joints (BCuP-2) |
|
|
| Sil-Cop 5 | Crown Sil-Cop alloy with 5% Silver (BCuP-3) |
|
|
| Sil-Cop 6 | Crown Sil-Cop alloy with 6% Silver (BCuP-4) |
|
|
| Sil-Cop 15 | Crown Sil-Cop alloy with 15% Silver (BCuP-5) |
|
|
| Sil 35 | Medium Flowing Silver Alloy (BAg-35) |
|
|
| Sil 45/45FC | Thin-Flowing Silver Alloy - Bare or Flux Coated (BAg-5) |
|
|
| Sil 50 Ni | Thin-Flowing High Strength Silver Alloy (BAg-24) |
|
|
| Sil 55/55FC | High Silver Alloy - Bare or Flux Coated (BAg-7) |
|
|
Alloys for Stainless Steel (MIG & TIG)
|
Product |
Description | Tech Sheet | MSDS |
| ER 308 | Used for welding 301 - 308 wrought alloys |
|
 |
| ER 308L | Lower carbon content increases resistance to intergranular corrosion |
|
|
| ER 308LSi | High silicon content increases wetability |
|
|
| ER 309 | Used for welding stainless to carbon steel |
|
|
| ER 309L | Lower carbon content increases resistance to intergranular corrosion |
|
|
| ER 309LSi | High silicon content increases wetability |
|
|
| ER 310 | Also used for welding dissimilar stainless steels |
|
|
| ER 312 | Best to use when chemistry of base metal is unknown |
|
|
| ER 316 | Used for welding 316 wrought alloys and CF-8M cast alloys |
|
|
| ER 316L | Lower carbon increases resistance to intergranular corrosion |
|
|
| ER 316LSi | Higher silicon content increases wetability |
|
|
| ER 317L | Utilized in severely corrosive environments |
|
|
| ER 320 | Primarily used to weld base metals of similar composition |
|
|
| ER 320LR | Low residuals reduce the weld metal hot cracking and fissuring |
|
|
| ER 330 | Used to weld 330 wrought alloys and HT cast alloys |
|
|
| ER 347 | Used to weld type 347/321 wrought alloys and CF-8C cast alloys |
|
|
| ER 409 | Used primarily for welding catalytic converters and exhaust system components |
|
|
| ER 409Cb | Columbium (Cb) is added to reduce oxidation losses |
|
|
| ER 410 | Used to weld type 403, 410, 414 and type 420 stainless steels |
|
|
| ER 420 | Used for many surfacing operations |
|
|
| ER 630 (17-4 PH) | Designed to weld Type 630 and some other precipitation -hardening stainless steels |
|
|
Alloys for Stainless Steel (Stick Electrodes)
|
Product |
Description | Tech Sheet | MSDS |
| E 308-15 | Lime-type coating allows for better out of position welding |
|
|
| E 308L-15 | Lime-type coating allows for better out of position welding |
|
|
| E 308-16 | Used for welding 301-308 wrought alloys |
|
|
| E 308L-16 | Lower carbon content increases resistance to intergranular carbide precipitation |
|
|
| E 308L-17 | Silica-titania coating allows for better flat & horizontal welding |
|
|
| E 309-15 | Lime-type coating allows for better out-of-position welding |
|
|
| E 309L-15 | Lime-type coating allows for better out-of-position welding |
|
|
| E 309-16 | This alloy is often used to weld stainless steel to carbon steel |
|
|
| E 309L-16 | Lower carbon content increases resistance to intergranular carbide precipitation |
|
|
| E 309L-17 | Silica-titania coating allows for better flat and horizontal welding |
|
|
| E 310-15 | Lime-type coating allows for better out-of-position welding |
|
|
| E 310-16 | Also used for welding dissimilar stainless steels |
|
|
| E 312-15 | Lime-type coating allows for better out-of -position welding |
|
|
| E 312-16 | Best to use when chemistry of base metal is unknown |
|
|
| E 316-15 | Lime-type coating allows for better out-of-position welding |
|
|
| E 316L-15 | Lime-type coating allows for better out-of-position welding |
|
|
| E 316-16 | Used for welding 316 wrought alloys and CF-8M cast alloys |
|
|
| E 316L-16 | Lower carbon content increases resistance to intergranular carbide precipitation |
|
|
| E 316L-17 | Silica-titania coating allows for better flat and horizontal welding |
|
|
| E 330-16 | Used to weld type 330 wrought alloys and HT cast alloys |
|
|
| E 347-16 | Used to weld type 347/321 wrought alloys and CF-8C cast alloys |
|
|
| E 410-16 | Used to weld type 403, 410, 414 and type 420 stainless steels |
|
|
Alloys for Stainless Steel (FCAW)
|
Product |
Description | Tech Sheet | MSDS |
| E308LT-1 (FC & FL) | Flux Cored Stainless. Available in "All position" or "Flat" |
|
|
| E309LT-1 (FC & FL) | Flux Cored Stainless. Available in "All position" or "Flat" |
|
|
| E316LT-1 (FC & FL) | Flux Cored Stainless. Available in "All position" or "Flat" |
|
|
Alloys for Steel
|
Product |
Description | Tech Sheet | MSDS |
| Crown 2 - ER 70S-2 | Triple Deoxidized Mild Steel Wire (TIG) |
|
 |
| Crown 3 - ER 70S-3 | Most Commonly Used Mild Steel Wire (MIG & TIG) |
|
|
| Crown 5 - R45 | Copper Coated Steel Wire for Oxy-fuel welding (OFW) |
|
|
| Crown 7 - ER 70S-6 | This Wire has smoother running characteristics than ER 70S-3 (MIG & TIG) |
|
|
| Crown 8 - ER 80S-D2 | Provides X-Ray quality welds (MIG & TIG) |
|
|
| E 71T-GS | Superior self-shielding, all position flux-cored wire |
|
|
| Royal 120/120FC | Nickel Silver Brazing Alloy/Bare & Flux coated (RB CuZn-D) |
|
 |
| Crown 125/125FC | Low Fuming Bronze/Bare & Flux coated (RB CuZn-C) |
|
|
| Crown 126 | Low-Fuming Brass-Nickel Brazing Alloy/Bare (RB CuZn-B) |
|
|
| Royal 130 FC-P | Premium Flux coated Brazing Rod |
|
|
| Royal 200 | Premium Mild Steel Electrode (AC-DC) |
|
|
| Royal 200 -T | Superior Versatile steel TIG alloy |
|
|
| Royal 205 | Premium Low Hydrogen - Iron Powder Coated Electrode |
|
|
| Royal 205-T | Premium triple deoxidized TIG alloy |
|
|
| Royal 208 | Premium High Strength Low Hydrogen Electrode |
|
|
| Royal 208-T | Premium high strength TIG alloy |
|
|
| Royal 220-M | Premium High Strength Alloy for Wide Variety of Steels (AC-DC) |
|
|
| Royal 220-TIG | Bare wire for TIG welding of a wide variety of steels |
|
 |
| Royal 220-MIG | Bare wire for MIG welding of a wide variety of steels |
|
|
| Crown #15 | 1 1/4 Chrome - 1/2 Moly for TIG (ER 80S-B2) |
|
|
| Crown #21 | 2 1/4 Chrome - 1Moly for TIG & MIG (ER 90S-B3) |
|
|
| 4130 | Chrome - Moly MIG wire |
|
|
Tool and Die Alloys
|
Product |
Description | Tech Sheet | MSDS |
| Crown AH-10 | 36" TIG Wire (Air-Hardening) |
|
|
| Crown AH-20 | Premium Coated Electrode (Air-Hardening) |
|
|
| Crown 12-AH-10 | 36" Premium TIG Wire for D-2 tool steels |
|
|
| Crown CM-86-10 | 36" TIG Wire (Chrome-Nickel-Moly Alloy) (8620) |
|
|
| Crown CM-86-20 | Premium Coated Electrode (Chrome-Nickel-Moly Alloy) (8620) |
|
|
| Crown CX-20 | Premium Electrode for Cast Iron Stamping and Forming Dies |
|
|
| Crown FH-10 | 36" TIG Wire (Flame-Hardening) available in MIG Wire (FH-30) |
|
|
| Crown FH-20 | Premium Coated Electrode (Flame-Hardening) |
|
|
| Crown 12-FH-10 | 36" Premium TIG Wire (6150) |
|
|
| Crown HS-7-10 | 36" Bare TIG Wire (Shock Resistant) |
|
|
| Crown HSS-10 | 36" Bare TIG Wire (High Speed) |
|
|
| Crown HSS-20 | Premium Coated Electrode (High Speed) |
|
|
| Crown HW-10 | 36" Bare TIG Wire (Hot-Work) |
|
|
| Crown HW-20 | Premium Coated Electrode (Hot-Work) |
|
|
| Crown 12-HW-10 | 36" Premium machinable hot work TIG Wire |
|
|
| Crown NT-HW-10 | 36" TIG Wire (Tungsten Free Hot-Work) |
|
|
| Crown NT-HW-20 | Premium Coated Electrode (Tungsten Free Hot-Work) |
|
|
| Crown OH-10 | 36" Bare TIG Wire (Oil Hardening) |
|
|
| Crown OH-20 | Premium Coated Electrode (Oil Hardening) |
|
|
| Crown PIM-10 | 36" TIG Wire (AISI P-20 Mold Steel) |
|
|
| Crown WH-10 | 36" Bare TIG Wire (Water Hardening) |
|
|
| Crown WH-20 | Premium Coated Electrode (Water-Hardening) |
|
|
| Crown 2-25-10 | 36" TIG Wire for dissimilar steels or tool steels |
|
|
| Crown 301-MAR | 36" TIG Wire for Maraging Tool Steel |
|
|
Miscellaneous
|
Product |
Description | Tech Sheet | MSDS |
| R AZ61A | 36" Magnesium Tig Rod |
|
|
| R AZ92A | 36" Magnesium Tig Rod |
|
|
| Royal ER Ti-1 | 36" Titanium Tig Rod |
|
|
| Royal Galv-Bar 70 | 14" Torch Rod for Regalvinizing |
|
|
| Crown Purple Heat Eater | Heat - Resistant compound (Heat Sink) |
|
|
| Royal Kirkrod | 18" & 36" For Torch or Tig to Repair Zinc Based Metals |
|
|
| Crown 69 | Nozzle Shield Anti-Spatter (Aerosol) |
|
|
| Crown 69 | Nozzle Shield Anti-Spatter (Bulk) |
|
|
| Crown 69-W | Water Based Anti Spatter (Aerosol) |
|
|
| Crown 69-W | Water Based Anti-Spatter (Bulk) |
|
|
| Crown 69-Dip | Anti-Spatter Dip |
|
 |
| Crown-Galv | Cold-Galvanizing Zinc Primer (Aerosol) |
|
|
| Crown-Galv | Cold-Galvanizing Zinc Primer (Bulk) |
|
|
IF YOU ARE UNABLE TO RETRIEVE THE DESIRED INFORMATION FROM THIS WEBSITE PLEASE CALL (800) 521-7878 FOR ANY DOCUMENT THAT YOU NEED.
